1 / 4
Nerf Rebelle Guardian Front Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modded my Rebelle Crossbow, but didn't like the front grip.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 10
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modded my Guardian by cutting off the stock and bow, followed by filling in the holes.
Wanted something nice for the front grip, though.
the hardware i used is brass spacers and some screws.
- Screws: M3 x 12mm button head socket cap screws, thread length: 12mm, thread pitch: 0.5mm, thread diameter: 3mm. https://www.amazon.com/dp/B0CGTR8VYZ
- Spacer: M3x20 Female Thread Hexagonal Hex Brass Pillar Standoff Spacer. https://www.amazon.com/dp/B07WQTF9X9
- Two wood nails, 2.5mm diameter (cut to fit)