EVA_Asuka
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: Auska.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.5x200mm in size, you can print with larger size (increase the X and Y proportionally) to see the details better, but dont change the Z height.
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm
Filaments Used:
#000000 PLA 3DHoJor Black Transmission Distance: 0.1
#0000ff PLA 3DHoJor Blue Transmission Distance: 3.1
#cd382e PLA Kingroon Red Transmission Distance: 4.2
#ffff00 PLA Sunlu Yellow Transmission Distance: 6
#ffffff PLA Sunlu White Transmission Distance: 6.2
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 2.4
This print uses 6 unique filaments, Other brands of filaments with similar TD should work as well.
Swap Instructions for one AMS:
Slot1: Black
Slot2: Blue
Slot3: Red
Slot4: Yellow
Start with Black (Slot1)
At layer #6 (0.56mm) swap to Blue (Slot2)
At layer #9 (0.8mm) swap to Black (Slot1)
At layer #10 (0.88mm) swap to Red (Slot3)
Pause at layer 11 to allow color swap:
Slot1: Black --> White
Slot2: Blue --> Cyan
At layer #14 (1.2mm) swap to Yellow (Slot4)
At layer #16 (1.36mm) swap to White(Slot1)
At layer #24 (2mm) swap to Cyan (Slot2)
At layer #26 (2.16mm) swap to White (Slot1) for the rest.