Elegant Spiral Vase – Beautiful Vase Art
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stylish spiral vase—single-wall print, 90 g PLA, 10 h, scaled 133/142 %, perfect décor accent.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 54
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed this modern spiral vase for my mom and then enlarged it in the slicer (X / Y + 33 %, Z + 42 %). Even with just one perimeter wall, the print comes out surprisingly sturdy—perfect for dried or artificial flowers or simply as a minimalist décor piece.
Recommended Print Settings
| Setting | Value | Notes |
|---|---|---|
| Nozzle | 0.4 mm | Works with 0.2 mm too—just adjust wall count |
| Layer height | 0.2 mm (or finer) | Finer layers = smoother curves |
| Perimeters | 1 | Little Infill needed |
| Vase Mode (Spiralize) | Not tested | possibly a little unstable |
| Supports | None | Model is self-supporting |
| Bottom layers | 0–2 | If you need a sealed base, add layers |
Material used: ≈ 90 g PLA
Print time: ~ 10 hours at 80 mm/s
Model scale: Scale X and Y to 133% and Z to 142% to get the Vase in the picture.
Important Notes
Not watertight. For real flowers, place a glass or plastic insert inside.
Want extra strength? Use 2 perimeters and more bottom layers; weight increases only slightly.
Smaller versions retain the elegant curve—just scale down uniformly.