Adirondack chair (1:5 scale) with screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of the famous Adirondack chair. It is modeled 1:1, but is intended to print on 1:5 scale.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of the famous Adirondack chair.
The original print model is https://www.thingiverse.com/thing:7018700. There you'll find more details.
It is modeled 1:1, but is intended to print on 1:5 scale. To do this, set the scale in the slicer to 20%. The parts are connected to each other by self-tapping screws M1.2*10. It will probably be necessary to first drill the boreholes with a 1.3 and the tap holes with a 1 mm drill bit, see also the drawing.
There is also a model that is mounted with dowels: https://www.thingiverse.com/thing:7009294.
A number of parts are used several times. On picture of the CAD model and the drawing the color of the parts indicates which parts are identical. The drawing also shows how the chair is put together. The table below is the BOM.
| Quantity | Name |
|---|---|
| 2 | A_Seating truss |
| 1 | B_Topstrip |
| 1 | C_Lower strip |
| 5 | D1,5,6,7,8_Seat board |
| 1 | D2_Seat board |
| 1 | D3_Seat board |
| 1 | D4_Seat board |
| 1 | D9_Seat board |
| 1 | E1_Backrest board |
| 2 | E2_Backrest board |
| 2 | E3_Backrest board |
| 2 | E4_Backrest board |
| 2 | F_Frontleg |
| 2 | G_Backleg |
| 2 | H_Support |
| 2 | I_Armrest |
| 96 | Self-tapping screw M1.2*10 |