Picatinny rail fixed stock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular, stout SMG styled stock for CQB blasters.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 135
- Makes
- 1
- Views
- 852
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With 3 angle options to choose from, this stock brings your top rail to you!
I wanted to Carbine-ize my Venom Pro, but wasn't super satisfied with how any of the other stock options available fit my frame, so I made my own (with blackjack, and hookers!)
Printing instructions:
Print any of the stock bases
Print stock body and stock body mirror
Print any buttplate
Print any spacers as necessary
All of my prints of this are done in PETG, 20% infill, 4 walls. They've held up to a reasonable amount of abuse.
Hardware list:
- 7 M3 hex nuts
- 2 M3x8mm Socket head cap screws
- 5 M3x20mm Socket head cap screws
- 2 M5 hex nuts
- 2 M5x30 socket head cap screws
Additional hardware list (required per stock spacer added):
- 3 M3 hex nuts
- 3 M3x20mm Socket head cap crews
Assembly instructions:
- Insert stock body and stock body mirror into stock base, screw two of the M3x20mm screws into the stock body through the base
- Screw two M3x8mm screws into the stock body
- Insert the stock body into the buttplate, screw together with 3 more M3x20mm screws
Future plans:
- Add compatibility for the QD picatinny stock system from the Crush
- Brace between rear of stock body and stock buttplate for extra rigidity and tactics
STEPs provided for your remixing pleasure. Enjoy!