Prusa Mini - LCD Back Cover with Vent Holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remixed version of the LCD Back Cover that adds vent holes
- Rating
- 4.818 / 5
- Likes
- 18
- Downloads
- 146
- Makes
- 10
- Views
- 579
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
A simple remix to add vent holes in the back of the LCD Back Cover, which had already been remixed to remove the screw holes in favor of a single cutout, to make room for the screw that secures the display assembly to the printer. While looking for a back cover, I wanted one that did not require new screws or modifications to the printer. I also realized that a lot of comments requested or raved about having vent holes for air flow. I found the snug fit LCD Back Cover and remixed it to include some hexagonal vent holes.
Print Instructions
Print exactly as the original…on the side. I printed this long in the Y-axis (the print was mostly front to back movement). This greatly reduces side to side shaking that can cause the print to come off the surface. I printed with a 0.4mm nozzle using black PETG and a 0.2mm layer height. Can also be printed with PLA.