1 / 1
mini jackstand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
jackstand designed to use a m3 press fit insert in the adjustment handle, and a m3 hex cap screw, 30-40mm long
press the screw into the jack head, thread on the adjustment handle(after pressing in the threaded insert), then insert the screw into the jack hole and adjust the handle to move the head up and down