1 / 3
Aluminium Mast Kathrein SHAPEG HDM Cover 135/140 — image 1
1 / 3

Aluminium Mast Kathrein SHAPEG HDM Cover 135/140

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printed cover for dismounted Kathrein Shapeg HDM 135/140

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
64
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

3D printed cover for dismounted Kathrein Shapeg HDM 135/140:

The outer part can be mounted using the original screws, as it matches the original Kathrein Shapeg mounting pattern (according to their technical drawing).

You will need additionally:

  •  4 threaded M6 inserts
  • 2x M6x10 screws
  • 2x M6 screws (roof thickness + 20-25 mm)

for assembly.

The inner part can be printed with PETG.
For the outer part and the top cover, I used ASA.

Add some styrofoam between the inner and outer parts for better insulation.

3D-gedruckte Abdeckung für demontierte Kathrein Shapeg HDM 135/140:

Der äußere Teil kann mit den Originalschrauben montiert werden, da das Bohrbild dem der originalen Kathrein Shapeg-Halterung entspricht (laut technischer Zeichnung).

Du benötigst:

4 M6-Gewindeeinsätze

2× M6x10 Schrauben

2× M6-Schrauben (Dachstärke + 20-25 mm)

Der Innenteil kann aus PETG gedruckt werden.
Für den Außenteil und die obere Abdeckung habe ich ASA verwendet.

Zwischen Innen- und Außenteil sollte etwas Styropor zur besseren Isolierung eingelegt werden.

 

Tags