Dog wheelchair license plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a multi-part model for a "license plate" for a Walkin' Wheels small dog wheelchair.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 51
- Makes
- 0
- Views
- 1,298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Public Domain
This is a multi-part model for a "license plate" for a Walkin' Wheels small dog wheelchair. The rear portion slides over the bare metal rod of the wheelchair; the front portion is like a license plate you can screw onto it, so you can put whatever you want on that part - we extruded our dog's name and printed it in a separate color by swapping out the filament mid-print.
If your dog is narrower you might not have as much bare space on the metal rod to put this bracket... but the model should be fairly easily modified in Fusion 360.
The screws and nuts used are all M3; the nuts are captured by the rear bracket and the screws go through the front plate. The holes for the nuts are not all super great, or at least my print-out of the holes was not - a little Xacto knife action took care of that for me.
I added the gcode for the two parts side by side to get a good duration estimate attached to this print on the site… but you'll probably want to print the rear bracket with either supports or standing on one end or the other (that's what I did!)
Hope you find this useful!