OrbitFlex MagSafe Cover — Snap, Charge & Mount Your CMF Phone 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OrbitFlex adds slim N52 MagSafe ring to CMF Phone 2 cover—snap to chargers, mounts, wallets at full Qi2 speed.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 51
- Makes
- 0
- Views
- 879
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Turn your CMF Phone 2 into a MagSafe powerhouse with one print. OrbitFlex drops straight onto the official Universal Cover, adds an ultra-thin N52 magnet ring, and keeps the Nothing aesthetic alive with clean, screw-through styling. Snap it to chargers, car mounts, power banks or wallets—no wobble, no guess-work, full Qi2 speed.
Hardware you’ll need
MagSafe ring magnet – N52, Ø 56 × 46 × 2.5 mm, Ni-Cu-Ni coated (3-pack on totalElement) totalElement
3 M VHB 5907 tape, 0.20 mm (or medium-viscosity CA glue) for a lasting bond 3M
4 × M2 × 5 mm screws (reuse the originals)
Assembly in 4 quick steps
Dry-fit the back plate on your Universal Cover; check screw holes line up.
Install the magnet
Option A — In-print: Pause at Z, drop the ring into the recess, resume.
Option B — Post-print: Peel a 0.2 mm VHB ring or spread a thin bead of CA, press magnet flush, let cure.
Clip on the ring-cover: a tiny drop of CA or a 1 mm VHB dot at 12 & 6 o’clock keeps it locked but removable.
Screw down the cover (torque ≈ 0.15 Nm). Done—your CMF now snaps to any MagSafe accessory.
Why it’s worth your print
Instant upgrade – true MagSafe + Qi2 alignment without a bulky case.
Mod-ready – locator wall doubles as anchor for future add-ons (wallet, tripod boss, etc.).
Nothing DNA – exposed screws, clean surface, zero branding.