Slot Cut Router Guides
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Straight and angled (23°) router guides for cutting slots. For use with a 6" router.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Straight and angled (23°) router guides for cutting slots, for use with a 6" router. I made these guides to cut slots into plywood, to make a slotted base for an all plywood bed frame.
Print with a durable filament, like Hatchbox PLA MAX, some kind of PETG, or similar. I recommend printing each on its side, as they is mean to be clamped onto the workpiece, which should compliment most of the stresses. Recommended print settings:
- 0.2mm Layer height
- 4+ Minimum perimeters
- 15%+ Infill
- Enable supports
Printing them upright would likely make them less durable, and possibly make for a very frustrating print.