1 / 1
LDO V0 Bed Kit Thermistor Sock Mold
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a dome with holes to be filled with RTV. Sock helps securing thermistor from bed fans
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Process is pretty simple:
- Cover part with vaseline, then heat it a little bit so it fills the voids
- Take off jst connector so you wires can go through center hole
- push some rtv (anything red should work for sure) through bigger hole while pressing the model onto bed until it squeeze out from other holes
- press the model so it's touches the bed
- leave for few days untouched, then cut all the extra stuff with pliers
- push rtv inside through holes then slowly remove the dome, should give you nice dome like protection