Mazda 323 BF sunroof crank assembly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replacement for the manual sunroof crank handle
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
this is a complete replacement for the manual sunroof crank assembly. It is NOT intended to be mixed-and-matched with any OEM components other than the metal brace pictured. These files include everything you'll need to replace the assembly, but it is strongly encouraged that if you have the metal mount brace, that you use that. If you don't have it, I have included a replacement as well. You will need to purchase some parts that can not be printed. The parts I used include:
M3 x 5mm long thermal inserts (3x)
The parts print well, but remember to print them from ASA, ABS, or PETG. I did find that running a drill bit thru the holes helped assembly quite a bit. I've specified the drill sizes I used in the instructions. I highly recommend printing both the detents and the detent plates with the lowest layer height available as they have some small features on them.
I also created a second version that uses a magnet to keep the handle in the stored position you'll see in the files the handle and mount have a "_with magnet" configuration. This is added protection as I think the 3d printed detents will likely wear over time and the handle could drop going over bumps. Its currently designed for a 4mm dia x 2mm thick magnet that can be glued/pressed into place. If you want to build this configuration, you will still need all the other parts as well (minus the original handle and mount).