Magnetic Threaded Hose Ends for Dust Collection
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€17.31 – €21.15 net (excluding VAT)
For file: CE3PRO_Hose 100mm Left Mag Female.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €19.23 excluding VAT (range midpoint).
- Weight reported by the author
- 162 g
- Print time reported by the author
- 23 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Thread these into your dust collection hose so you can ditch the hose clamps. Also tucks the wire away, Safety First!!
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 183
- Makes
- 2
- Views
- 1,024
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Octo tab Magnetic coupler is not my idea. This version with threads for a dust collection hose is. I really wanted the hose support wire to tuck away and NOT need a hose clampTried to just mash up but was faster for me to just draw from scratch. I got the dimensions for the Mag coupler from Idea2Item @Idea2Item_134123 who has a great selection of mag coupler fittings. The Thread idea is from @ECF_331962. This fits the Powertec 4" hose https://www.amazon.com/dp/B00LPOR42M?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1. Their hose is left thread, one of the few that posted direction, seems like a quality hose. I did a test with PLA and am about to run another with PETG and will add the Ender 3 gcode for that too. print these with the magnet holes facing up. The hose wire relief will need support. I didn't like the way Cura wanted to supports it so I drew a single row support column.
If you like my work and respect the time I've invested, I would greatly appreciate your gratitude