1 / 7
Weather Shield for External CCTV Camera
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A weather shield to help protect your externally mounted CCTV camera from the worst of the elements.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 152
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently installed an external CCTV camera under a gutter (Eufy 2c Pro in this case). Despite its semi-protected position, I designed a weather cover/hood to provide more protection from the elements.
I've created two versions. A standard one, and a ‘recessed’ one whereby a recess for the camera mount is provided to allow a closer mounting of the hood to the camera.
The two models are approx 150mm wide x 150mm long. You can scale them to your heart's content if you wanted something bigger or smaller.
Printing
- Material: ASA for the weather resistance. PETG would probably also work just as well.
- Layer height: Not important - I used 0.2mm as that's my usual go-to setting.
- Perimeters: Four. I wanted the hood portion to be all perimeter and no infill.
- Infill: I used 30% Cubic. There's only a small amount of infill in the base section of the hood.
- Support: None required.