Stand for the best Cryptex
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for the Cryptex by Cees (5 wheel)
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 141
- Makes
- 4
- Views
- 1,081
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Share Alike
The Cryptex by Cees
Cryptex (5, 6, 7, 8 or 10 letter wheels) by Cees | Download free STL model | PrusaPrinters
is great model and I wanted to make a STAND for it. I made it so it does not require supports. That is why the long bars extensions are off set from center. it is a tight fit so you do not require glue but you can of course add it. Besides the pegs are there as well
Cleanup the hole (tends to distort due to size and orientation with a #49 drill bit if you have one). Use your 1.75 filament for the pegs. Put a small dab of glue is the peg is a bit loose.
If you use a wood filament try and use a .5 nozzle.
Filament PLA
Nozzle .4
Resolution .2
Hotend 210
Bed 60
Infill 15%
elephant foot compensation yes