Ruler with pencil and hilighter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.50 – €4.28 net (excluding VAT)
For file: ruler-PartBody_0.2mm_PETG_MK3S_3h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.89 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 3.94 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A handy drawing tool that holds a hilighter and a pencil
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
This is a multi-use office gadget. it has a CM and Inch ruler, with cutouts to allow use as a compass and to mark increments of 5mm and ¼ inch. it can store a standard mechanical pencil and a standard text hilighter. it also has a guide that is useful for hilighting text and as a lettering guide.
this was printed in PETG, but will work equally well in PLA. The sliced code makes the bottom (edges) and the raised lettering one color and the rest another color.
I printed this at 0.2 layer height to ensue the lettering was legible.