1 / 1
Caterpillar - Extra long version
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The 27 links version is nice and all, but if you want more: Here is the 96 links version!
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 217
- Makes
- 1
- Views
- 963
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
A longer version of the Caterpillar posted by FLink. Moved the parts around in Prusaslicer to fit as much as reasonably possible on the bed.
Some pieces in the corners might be stuck to eachother, but they should free up if you either press the 2 parts together (so the T-shaped bit loosens up from the part behind it) or pry them apart a bit with a knive.
Print in .20mm with 10% infill and you should be fine.
As with the original model, insert 2 bits of filament in the holes as feelers.