1 / 6
Cigarette box with magnetic closure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
22 pieces content
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 43
- Makes
- 1
- Views
- 520
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a cigarette box with a magnetic closure. It fits 22 cigarettes in the box.
The box needs 2 pieces of 10x3mm round magnets
and 2 pieces, 6x3mm.
Print settings:
0,4mm Nozzle
0,2mm layer height
3 walls
40% infill
but this can vary according to personal taste, I like it a bit more robust.
When printing, a pause must be taken to insert the magnets.
At layer 512 at the box. And at layer 35 at the lid
I fixed the magnets in place with cyanoacrylate and then continued printing.
Please pay attention to the correct polarity of the magnets, otherwise the lid will not close.