Escher's Solid - First Stellation of the Rhombic Dodecahedron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Polyhedron inspired by M. C. Escher
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 2
- Views
- 202
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
M. C. Escher is one of my biggest inspirations.
Also referred to as Escher's Star, this polyhedron can be seen in his famous work Waterfall, on top of the right tower.
I created these models with a chamber on the edges, so that there is a flat surface that can adhere to the build plate when printing. Once printed, they measure about 50 mm cubed. And because the sides slope up 45 degrees, it can be printed without supports.
The two models differ with the chamfer, one has a 1 mm wide chamfer, the other has a 2 mm wide chamfer. If that is still not enough for your build plate, I suggest adding a brim when printing.
Printing info:
Wall Line count: 2 or 3
Z Seam position: just make sure the layer doesn't start on the sloping angles
Supports: None
Infill: minimal, I use 8% gyroid
Adhesion type: brim (if required)