NEED REVIEW | LITTLE TESTING TIME | Filament motion detector based on RepRap Optical endstop | FlashForge Adventurer 5M | A5M | PRO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This detector is based on a broken printer extruder (from improvised components). For Slim Shandy Case
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 10
- Makes
- 0
- Views
- 727
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
ATTENTION THIS DEVICE MAY CREATE AN UNNECESSARY LOAD ON THE MAIN EXTRUDER, THEREBY DAMAGING IT OR STOPPING PRINTING FOR NO OBVIOUS REASON DUE TO ERRORS.
PLEASE, UNSCREW THE CLAMP SCREW (ON DETECTOR EXTRUDER) AS MUCH AS POSSIBLE AND GRADUALLY SCREW IT IN, TRYING TO FIND A BALANCE BETWEEN EASE OF MOVEMENT AND OPERATION OF THE MECHANISM.
This detector is based on a broken printer extruder (from improvised components). The detector is designed for the Slim Shandy case.
Required components:
-- A5M Extruder (or PRO)
-- M3 bolts of different sizes
-- PC4-M6-B, Straight collet fitting
-- Endstop Optical Optics limit-switch with 53cm CABLE for RAMPS 1.4 3D-printer (RepRap)
1. Assemble the system
2. Flash the printer to work with the motion detector
Based on:
Flashforge Adventurer 5M Enclosure "Slim Shady" by Илья Палкин | Download free STL model | Printables.com
Flashforge Adventurer 5M extruder housing (UNTESTED) by straciam | Download free STL model | Printables.com