HexiBox Series: Jammer XL

As seen on X and YouTube:
 

Designed for use with six 3.5" Tectonic balanced mode radiators, and a pair of the Tang Band W5 series subwoofers.  Suitable between 30Hz - 18kHz.  (Sigma Studio DSP chain file included for the Dayton Audio KABD-4100.)  Use reusable adhesive to seal around everything.

Tectonic 3.5" BMR:
https://www.parts-express.com/--297-2156

Tang Band W5 Subwoofer:
https://www.parts-express.com/--264-917

Dayton Audio KABD-4100:
https://www.parts-express.com/--325-434

Dayton Audio Battery Module:
https://www.parts-express.com/--325-212

M3 Screws:
https://www.amazon.com/dp/B0BMQ5Z96H

M3 x D5 x L4 Threaded Inserts:
https://www.amazon.com/dp/B0CS6VZYL8

M4 Screws:
https://www.amazon.com/dp/B0BMQ4WV1V

M4 x D6 x L6 Threaded Inserts:
https://www.amazon.com/dp/B0CS6XGMFD

Switches:
https://www.amazon.com/dp/B07YDCJFZJ

2" Polypropylene Webbing:
https://www.amazon.com/dp/B09FKNYPGK

Recommended printing settings:

PLA is okay; PETG is better.
At least 4 walls (perimeters) all the way around.
At least 20% gyroid infill.  (Higher is better.)

Disclaimer:  This is an acoustic model.  As such, it does not scale, nor is it compatible with drivers other than the ones specified.  Scaling / incorrect driver(s) will result in significantly diminished performance.

Notes:

Wire the line array with all (3) drivers on the left in parallel, and all (3) drivers on the right in parallel.  Apply a 90Hz high pass filter to the line array / 90Hz low pass filter to the subwoofers, or use the provided SigmaStudio signal chain to program the Dayton Audio KABD-4100 for the same tuning as in the HexiBase video.