Spachtel - Scraper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.16 – €1.42 net (excluding VAT)
For file: Spachtel V01_02_0.15mm_PLA_MINI_1h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.29 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.59 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dreiteilige Spachtel mit Schutzhaube Threepiece sraper with protective lid
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 170
- Makes
- 1
- Views
- 1,956
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Mit dieser dreiteiligen Spachtel kann Filament gut von der Druckplatte entfernt werden. Eine Schutzhaube verhindert wegschießende Filamentreste. Optional kann auch nur der Schraubenunterleger ohne Schutzhaube verwendet werden.
Ich habe die Teile aus PLA gedruckt. Die Klinge könnte natürlich auch in verschiedenen Materialien gedruckt werden, da sie ausgetauscht und und das Material an den jeweiligen Einsatzzweck angepasst werden kann.
Zum Zusammenbau ist eine Senkkopfschraube M4 x 13mm notwendig.
________________________________________________________________________________________________________________
With this three-piece scraper, filament can be easily removed from the printing plate. A protective lid prevents filament residue from shooting away. Optionally, it can be used the srew pad without the protective lid.
I printed the parts out of PLA. Of course, the blade could also be printed in different materials, since it can be exchanged and the material can be adapted to the respective application.
A countersunk screw M4 x 13mm is required for assembly.