Spools for Infento rockboard scooter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D models of the spools for needed for creation of the Infento rockboard/spacescooter
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
3D models of the spools for needed for creation of the Infento rockboard/spacescooter
for complete CAD model please see my OnShape model
The other parts needed are
bearings: 2x 6905ZZ (these are also used in standard Infento bearing blocks)
10x M6x12 socket head bolts, 10x M6 locknuts
2x Infento freewheels
Assembly: be aware that each freewheel is mounted in different orientation
Apart from that the ride also uses two 3D printed pulleys:
Pulley with bearings:
https://www.printables.com/model/248445-infento-pulley-with-608-bearings
I print everything with 0.28mm layer height in PETG. PLA should be also fine.