1 / 7
Raspberry Pi Zero 2W Arc Reactor Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom cover design for my Raspberry Pi Zero 2W, featuring the Arc Reactor pattern on the top cover.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The design is inspired by the iconic Arc Reactor, giving the Raspberry Pi Zero 2W a sleek and unique appearance. The case not only protects the board but also adds a visually appealing element to your setup.
There are two available configurations, each with a different bottom cover: Set 1 and Set 2.
- (Set 1 ) Model\print profile files:
- 3MF: AZI_RasPi_Z2W_Arc_Reactor_rev1_both_parts-set1.3mf
- STL: AZI_RasPi_Z2W_Arc_Reactor_rev1_top.stl (the same between both sets) and AZI_RasPi_Z2W_Arc_Reactor_rev1_bottom_type1.stl
- (Set 2) Model\print profile files:
- 3MF: AZI_RasPi_Z2W_Arc_Reactor_rev1_both_parts-set2.3mf
- STL: AZI_RasPi_Z2W_Arc_Reactor_rev1_top.stl (the same between both sets) and AZI_RasPi_Z2W_Arc_Reactor_rev1_bottom_type2.stl
Additional:
- 4x Screw: M2x12
- 4x Round Threaded Brass Heat-Insert Nut: M2x3.5x4 or M2x3.5x3