1 / 15
Noctua NH D14 bracket AM3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Noctua NH D14 Air tower cooler
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
Description
- Info for 3D model:
You can use this bracket for Noctua NH D14 on AM3 platform. Tested with PLA material on Asus M4A4BT-E (Socket AM3) with CPU AMD Phenom II x6 1090T. You can use original back plate.
- BOM list:
- Bolts M4x20 mm (x2)
- Screws M4 (x2)
- 3D Washer for M4 (include in model)
- 3D spacers between motherboard and AM3 bracket (include in model (x4))
- 3D bracket with dimension AM3
- Rubber (TPU) x4 spacers between CPU coolers and tower cooler
- Print time: 220 min
- Length/Weight: 3.52 meters (10 gr.)
- Installation
Please check after assembly if the cooler plate contact good with the CPU.
- Important notes
Warning* Don't tight extremely hard the nut if you don't have backplate! It is possible to bend the board and cause damage.
Note* With this model you can use original springs from Noctua accessories.