Leather colour swatch frames for IKEA Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frames for holding a piece of coloured leather, for the IKEA Skadis boards. A variant of the filament swatches.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 27
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In leathercraft, you can colour natural vegtan leather in various colours. These frames can hold a piece of leather (around 1.2mm-1.6mm) and show all the various colour options you have available.
A small template is added to cut out the leather to size.
The piece of leather can be placed in the frame by bending and pushing it in. It's not possible to display non-flexible materials in this frame, because it needs to be bendable to be able to place it.
A hole is added through the center of the piece, to be able to easily push out the swatch if you want to replace it.
Pins
Use the pins from the remixed model to place these frames on the IKEA Skadis board: Filament colour swatches for Ikea Skadis by xyren | Download free STL model | Printables.com
Material thickness
The frame is build for a material thickness of around 1.2mm to 1.7mm. The horizontal cutout is 1.35mm deep and the chamfer is 0.5mm deep. If you want to use this model for thinner or thicker materials, let me know and I'll make a variant.
How to print
This piece can be printed without supports, laying down on the bed.
👍Let me know what you think of this model, and how you think I can extend or improve it. I’m curious in your makes and remixes!
❤ Do you like this free model and want to support my work? Consider buying me a coffee: Buy me a coffee by deLederman | Download STL model | Printables.com