1 / 4
Mount for Garmin Varia RCT715 - Wilier 0 SLR (v.2.0) — image 1
1 / 4

Mount for Garmin Varia RCT715 - Wilier 0 SLR (v.2.0)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Light mount for Garmin Varia RCT715 on the seat pole of a Wilier 0 SLR. Seat pole design can be changed in Fusion 360.

Rating
0 / 5
Likes
10
Downloads
118
Makes
0
Views
1,032
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This mount for the Garmin Varia RCT715 attaches directly to the seat post. Im my case it is for a Wilier 0 SLR, but you can change the profile of the seat post in the attached Fusion 360 file to match your bike (just change the 1st sketch and the angle of the construction plan to match you seat post). This v.2.0 is much simpler and lighter than the previous version, which was still using the original round dove-tail connexion.

I find it easier to attach and remove from the bike than the original mount with the elastic band. You place the Attachment ring on the seat post and slide the Attachement with the Varia from the top. If you want, you can add a M3x12 screw from the side (a little hole is prepared in the model to cut the M3 thread), but it is not necessary for the stability, more as a safety feature.

To attach the Varia to the Locking Plate, you use the original metal screw from the back of the Varia, removing all other original locking mechanisms. It does not refrain from going back to the original mount if required.

All parts were printed with Prusament PC Blend.
The “Mount Garmin RCT715 - Wilier 0 SLR.3mf” file does include modifiers which only work with PrusaSlicer.

Tags