1 / 5
Wire Spool Caddy for 55mm x 21mm Wire Reels — image 1
1 / 5

Wire Spool Caddy for 55mm x 21mm Wire Reels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This caddy has been designed for the 55 x 21 wire reels available on Amazon.

Rating
0 / 5
Likes
19
Downloads
53
Makes
0
Views
239
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Wire Spool Caddy for 55mm x 21mm Wire Reels

This caddy has been designed for the 55 x 21 wire reels available on Amazon.

The holes for the wires are 1.5mm which should suit a range of popular sizes. I use 24AWG and the slot beneath is to retain/park the wire to stop tangling.

I used supports for the two terminal side holes but may not be necessary on your printer.

Printed at 0.2mm with PLA.

I've included a STEP file as well as an STL so alterations, if required, will be easier.

Hope this helps someone.