Makita LXT Die Grinder (DGD800) Wrench Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wrench holder for the Makita Cordless LXT Die Grinder (DGD800) and its two 13mm collet wrenches.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Makita Die Grinder Wrench Holder
A wrench holder for the Makita Cordless LXT Die Grinder (DGD800) and its two 13mm collet wrenches.
This is a wrench holder for the two 13mm wrenches that came with the Makita LXT Die Grinder (DGD800), which did not come with a bag or case. You put the wrenches into the holder, then clip it onto the arbor under the collet nut. The ends of the wrenches protrude past the collet nut and are prevented from falling out of the holder by the flared section of the tool.
I made this to store the wrenches with the die grinder when it was not being used. You must remove the wrench holder before using the die grinder. Remember, you must remove the wrench holder before using the die grinder.
Other Die Grinder Models
I do not know if this will fit different models of Makita's long reach die grinders. Pictures of models GD0600 and the GD0601 appear to show similar arbors and collet nuts as the DGD800, but I do not know if the arbor is the same size. It may work for you if the collet wrench of your die grinder is a 13mm. Makita has different product numbers for the collets and collet nuts for each of its different die grinder models, so I was unable to confirm by replacement part numbers whether this would work with other long reach Makita die grinders.