1 / 8
Giant Chess Board for Lewis Chess Pieces — image 1
1 / 8

Giant Chess Board for Lewis Chess Pieces

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lewis chessmen printed at full size are larger than a standard chessboard: this one can handle them!

Rating
0 / 5
Likes
18
Downloads
117
Makes
0
Views
957
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

This extra-large chessboard is designed for the famous medieval Lewis Chess Pieces found on the island of Lewis in Scotland. There is a set of these modeled at Thingiverse by user nestra:

https://www.thingiverse.com/thing:2802385 

According to the British Museum website, the original pieces are massive, with the kings averaging about 95 mm high (3.75 inches). A standard board is not big enough to play with a set printed at an accurate size. So behold, this design.

The board is split into 4 equal sections about 10 inches square, and is contained by a decorative interlocking border that keeps everything together. One board and one border can fit on a Prusa XL printer bed, and the print can repeat 4 times for a complete board. The board can work without the border, but you need a way to fasten the quadrants together (archival linen tape on the underside, for example).

The design is a minimalist take on an abstracted Celtic knot. The detailing is designed to account for printing large flat top fill areas. I tried a couple of different patterns and preferred Concentric in my final print. I tried ironing, but it was not a good look.

Chamfered channels are built into both sides of the board. The channels on the build plate side act as expansion joints, ensuring a dead flat print without using brims or helper disks. I've had excellent results with this technique.

The border interlocking mechanism features strategic chamfers and a draft angle to ensure a snug fit. On my third design iteration, I got one that snapped together well without sanding or filing. Your mileage may vary: let me know what your experience is if you print it, and I'll attempt an alternate design to account for any difficulties.

The images include a rendering of the model, an exploded view showing assembly, and a set of Lewis chess pieces on the board both with and without the border.

I strongly recommend using the multi-material capability of the Prusa XL (we have a 5T in the shop, but a twin extruder would work just as well). I printed in black and brick red PLA using rectangular infill with 0.2 Structural setting, no brims, support, or helper disks.

Final note: of course it’s possible to scale the file to fit a Prusa MK 3 or 4. You can get a smaller-than-standard 16 inch board without the border this way.

Tags