1 / 3
BLV Mgn Cube - X Carriage fixed for BMG Direct Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is part of the BLV MGN Cube printer.This is necesary if your extruder is Direct Drive, and BMG model. See…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is part of the BLV MGN Cube printer.
This is necesary if your extruder is Direct Drive, and BMG model. See notes.
It was made to align the BMG extruder with the E3Dv6 input. (they were missaligned)
Print them in PETG, 90% infill vertically with supports.
....
Notes: This thing, fix the offset of 2mm for 34.50mm BMG Clone extruders. Mine is from Bluerolls store, very nice extruder, but the original setup has a 2mm offset.
(https://www.aliexpress.com/item/32963266037.html)
Category: 3D Printer Parts