1 / 1
1.25in EMT Carriage for overhead dust collection
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1.25in EMT Carriage for overhead dust collection
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to support 1.25" EMT conduit, and over engineered to prevent any twisting of the carriage as I'm using this system with a Lowrider 3 CNC by V1Engineering.
Notes:
- The model works with M8 Bolts and 608 2RS Bearings
- I got the bearings off of Amazon: https://a.co/d/13dsB3k
- The endcap is designed to keep the carriage from falling off the end
- The fit is tight, I couldn't get mine off after putting it on
- The plug is designed to sit in the end of the emt that goes into the base to reduce friction
These carriages were initially designed to work with the hose clamps designed by Pixel 2 Prototype, but I messed up the bottom hole dimensions, so I ended up slimming up the connection point for the 4"hose holder since that was faster to reprint. The bottoms of the clamps remain the same.