Watering Can Sprinkler End
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The end diffuser thing for my watering can. The holes are angled out from the center so the water should fan out.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 87
- Makes
- 0
- Views
- 501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
I lost or broke the thing that goes on the spout of my watering can, so I made my own.
I've included a version without holes in case someone wants to drill their own or modify the design. I tried printing without the top and bottom layers and just relying on the infill set to small hexagon pattern to create the holes, but there were way too many holes and it didn't diffuse the water well. I think the version with fewer holes works the best.
The thread pitch is 5.3mm, thread depth is 2.5mm, and the spout has 18mm diameter.