1 / 1
Drawer dividers for plastic storage cabinet by Akro-Mils — image 1

Drawer dividers for plastic storage cabinet by Akro-Mils

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Manufacturer of the storage drawers I bought didn't provide enough dividers for them all, so I made more.

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
91
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Public Domain

I recently bought the set of three organization drawers from Amazon made by Akro-Mils, which have a total of 96 small drawers and 36 large drawers.  They include drawer dividers molded into the back of the units, but removing them seems like it will remove some of the stiffness of the cabinet - and even then, they only included dividers for 8 small drawers and 4 large drawers on each cabinet.  A total of 24/12 dividers for 96/36 drawers wasn't enough for my needs, so I made these.  Nothing too fancy, but hopefully useful to somebody.

These were made for my specific brand of organizer, no guarantee they will work for others but since most of the ones I've seen appear to be roughly the same dimensions, they might.  The small ones are 52.4 mm wide at the top, 49.8 mm wide at the bottom, 31.6 mm tall, 1.5 mm thick and have 90 degree sides; the large are 134 mm at the top, 130 mm at the bottom, 49 mm tall, 1.6 mm thick and the sides are slightly angled to match the sides of the drawers.

The examples in my picture were printed with Jessie Natural PLA.  Since they're not structural, print settings shouldn't be too important - I used .15 layer height on the small ones (they are 1.5 mm thick, so 10 layers) and .20 for the large ones (they are 1.6 mm) just because I liked the easy math, and 15% infill on both.

One note on the large one - the small cutout in the bottom is not centered, because the bump in the drawer is not centered.  The cutout should be closer to the front of the drawer than the back for proper fit.