(Tokyo Marui) G17 mount rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to put a generic optical sight on my Tokyo Marui G17 airsoft gun, so I created a mount.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 86
- Makes
- 1
- Views
- 331
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
This airsoft gun can be assembled with a dedicated optical sight, but I have a generic one and wanted to put it on, so I made this one.
The higher position of the optical sight may cause it to deviate from the adjustment range.
Once this is attached, the original rail cannot be used.
I prepared three variations.
V1: Basic model
V2: Finger hold model
V3: Slit model
About Printing
PLA, PETG, ASA, etc. are good materials.
Support material: required (organic)
Pitch: 0.2mm
Nozzle: 0.4mm
Wall: 3
Infill: 30%
Brim: not required
Printing time: about 2 hours
What you need to prepare separately
Bolts: M3*35
Nuts: M3
Optical Sight: 20mm rail compatible
It was made to fit an airsoft gun and may not be assembled on a real gun.
Please play it safe first.
東京マルイ G17 Gen5 MOS ガスブローバック No.108 Glock