Keg ball lock adapters

These adapters are intended to help home brewers with cleaning beer lines or purging gas lines.

The spay_bottle_adapter is intended to be screwed onto the end of a spay bottle such as: https://www.aliexpress.com/item/1005006294386541.html?spm=a2g0o.order_list.order_list_main.1280.4b081802KHwbFd This is then connected to a Cornelious keg ball lock connector.

The post_double_ended is for connecting two Cornelious keg ball lock connectors or to help with bleeding a beer / gas line.

Joiner - this a universal (3/8'th BSP threaded) joiner part to which you could be used for fitting other parts such as barbs etc.

Please note:

• The gas / beer post fittings - you will need to fit a regular rubber o'ring as you would to a normal gas or beer post if you want them to be gas / liquid tight
• spray bottle adapter - in order to make the trigger function work correctly will need to swap the rubber insert (basic valve) from the inside of the original spay bottle nozzle over into the adapter part
• To help clean out the threads and make them functional it may help to run a steel fitting (with a 3/8th BSP thread) through them a few times

I have found these parts to be very helpful, good luck with them.,.,

Category: Hobby