Comedero para Canarios y Aves Pequeñas – Diseño Compacto, Práctico y Versátil
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.44 – €0.54 net (excluding VAT)
For file: COMEDERO (Prusa Mini)_0.25n_0.15mm_PETG_MINIIS_36m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.49 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 36 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Comedero estándar para jaulas de aves pequeñas como los Canarios...
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution — Noncommercial
🐦 Comedero para Canarios y Aves Pequeñas – Diseño Compacto, Práctico y Versátil
Este comedero ha sido creado pensando en aves pequeñas como los canarios.
Es perfecto para ofrecer frutas u otros alimentos frescos de forma accesible y segura dentro de la jaula. (Manzana, Huevo, Lechuga, etc)
ℹCaracterísticas:
- Encaje a presión en la mayoría de jaulas estándar
- Pestaña frontal para facilitar el manejo
- Ideal para colocar trozos de fruta (como una raja de manzana)
- Impreso en PLA y PETG con diferentes configuraciones (ver detalles abajo)
📐 Dimensiones:
- Longitud total: 72 mm
- Zona para alimento: ~50 mm
- Pestaña: 15 mm
- Profundidad interior: 13.5 mm
⚙ Configuraciones de impresión utilizadas:
- PLA con Bambu Lab A1 (boquilla 0.4 mm, capa 0.20 mm)
- PETG con Prusa Mini (boquilla 0.25 mm, capa 0.15 mm)
No se requieren soportes. El modelo se instala fácilmente con un ligero encaje a presión.
➡ Publicado también en:
⭐- MakerWorld (@viikktor_),
⭐- Printables (@viikktor_3074748)
⭐- Thingiverse (@viikktor__)
⭐- Cults3D (@viikktor_)
Gracias por descargar 💖, para mejoras o ideas, no dudes en decírmelo en comentarios.
✴Dimensiones:
➡Longitud total: 72 mm
➡Área útil para alimento: 50 mm aprox.
➡Pestaña frontal: 15 mm
➡Profundidad interior: 13.5 mm
✴Fabricación:
El comedero ha sido fabricado mediante impresión 3D en dos tipos de material para garantizar resistencia y durabilidad:
➡PLA impreso con (Bambu Lab A1)
Boquilla: 0.4 mm
Altura de capa: 0.20 mm (perfil estándar)
➡PETG impreso con (Prusa Mini)
Boquilla: 0.25 mm
Altura de capa: 0.15 mm (perfil rápido)