Insta-Swap Mechanical Lens Swapper Backplate for CMF Phone 2 Pro by Nothing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mechanical lens swapper to quickly swap between lenses when taking pictures. Only adds 1mm of extra thickness!
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 20
- Makes
- 0
- Views
- 1,596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully 3d printed mechanical lens swapper for the CMF phone 2 pro. Quickly swap between your normal camera and your lens with the spin of a gear! As a bonus, it only adds 1mm of extra thickness vs the normal backplate.
Instructions:
Print out all of the parts (make sure to have 2 big gears). Next put all of the gears on their pegs as shown in the photo, and super glue the top cover down. Make sure to use super glue on the pegs and on the indented areas close to the gears otherwise the gears will slip.
Print Settings:
Support - On
Support on build plate only - On
Support type - Grid - Honeycomb Pattern (use for a really easy and clean removal process) Use organic support for the small gear.
Filament - PLA
Infill - 10%
Infill Pattern - Gyroid
Layer Height - 0.1
All parts are pre-oriented for the best orientation.
Disclaimer:
Please let me know if any changes need to be made. According to the phone and camera dimensions everything should work, but I do not have the phone to actually test it. Feedback is much appreciated!