1 / 22
The Staff of Wisdom - Kung Fu Panda 3/4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Staff of Wisdom from the Kung Fu Panda movies. I modeled it to be roughly 6 feet tall (1.83 meters) and…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 122
- Makes
- 0
- Views
- 576
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
This is the Staff of Wisdom from the Kung Fu Panda movies. I modeled it to be roughly 6 feet tall (1.83 meters) and can be assembled with super glue and a small length of fishing line.
Assembly
- There are two ways to print the top of the staff. You can print the Top_Front and Top_Back and then follow instructions 2-8, but this requires a larger printer. If you don't have access to a large enough printer, you can print the Top_Front_Hook, Top_Front_Base, Top_Back_Hook, and Top_Back_Base. The two Fronts and two Backs will fit snug but should still be glued together. Then follow the rest of the instructions.
- Then take the Top Front and super glue a length of fishing line (or some other hard to see string) horizontally to line up with the cut-out sections in the print.
- Next take the Top Back and do it vertically (or vice versa).
- Then line up the Front and Back and super glue together. You could print a section of the pole to help line the two pieces up as well.
- Next you take the two halves of the Floating ball and super glue them together so that they line up with the X created by the two strings. This should then give it the illusion of floating.
- Next you print one Pole Bottom and 7 Pole Extensions to reach 6 feet.
- Then you can either just screw them all together or spread super glue on the threads and then screw them together.
- Add any finishing touches you want and then that's it.
Hope you enjoy. Skadoosh!
https://www.paypal.com/ncp/payment/8FGVV3ZHBDZBN
Category: Props