1 / 8
Siren F35 Runcam Thumb Pro W Mount — image 1
1 / 8

Siren F35 Runcam Thumb Pro W Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fixed 35 degree angle for the Runcam thumb Pro W Siren F35 Split/F35 Uses the original Quadmula mounting hardware.

Rating
0 / 5
Likes
0
Downloads
16
Makes
0
Views
149
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I've taken the base GoPro base mount From Quadmula to use their current hardware to prevent the TPU from tearing and having more support overall.

I was having issues with my past mount, either a tough hit would move the camera out of place so I'd have to bring it in to loosen the bolt then having to retighten it since it wasn't a fixed angle and was using the normal gopro mount with a separate cam mount remixed for it. A couple months of crashing and flying and it started leaning towards one side and I'd also have a bit of jello due to all the constant bending and hits, lastly there was some hits that would either hit the cam hard enough to bump the SD card out or somehow hit the button and stop recording.

 After a little over a month of testing/bashing this mount i haven't had any issue (Knocking on wood) and has taken the jello jitters out of the video.

 

I made this one at a 35 degree angle since i run around 30-35 degrees for my quad cam.

 

The Three Small Circular cutouts at the top are there so you can screw the screws in with a semi slim hex driver, I didn't want to have them any bigger and risk any integrity and luckily an old NBD Hex driver i had laying around was the perfect size to go through.

 

This is also made specifically for the Runcam Thumb Pro W!! The Regular Thumb Pro comes with a slightly longer lens so if you were to use this mount it will most likely extrude past the mount. I think it should also be without saying but just incase this is also Specifically for the Siren F35/ F35 Split, since I believe they use the same top plate.
 

Tags