1 / 6
Asus ROG Zephyrus Duo 16 (2023) - Chunky Bottom Case for extra M.2 Cooling — image 1
1 / 6

Asus ROG Zephyrus Duo 16 (2023) - Chunky Bottom Case for extra M.2 Cooling

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This creates a larger bottom case for the Zephyrus Duo 16 to allow for M.2 heatsinks, fans and unrestricted air intake

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
257
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

My Asus ROG Zephyrus Duo 16 (2023) has been overheating for a while. The issue is that the SSDs get too hot and start throttling or disconnecting, especially when using power hungry fast M.2 drives. The air intake is also extremely restrictive.

These files create a larger bottom case. It includes spacers for the screws, which reuse the original screws and M5x10 screws, a cut template to cut out a new bottom panel (here made in transparent acrylic) as well as panels for all 4 sides.

 

  • The back panel will still require some work for better fitment.
  • The files label 3, 4 and 7 will need to be printed 3, 4 and 7 times. These are spacers with different lengths to fit old screws.
  • You will also need 13 M5x10 screws. I used counetersunk screws.
  • I also used two 5v 4010 blower fans and two tall M.2 heatsinks. The blower fans are soldered to the right USB-A port as it is the largest 5v pads you can find nearby
  • You need to cover the ambient light sensor (labelled clearly as ALS), otherwise the laptop won't boot. I used a bit of electrical tape.
  • The sides are bonded to the acrylic with 2 part epoxy
  • Rather than filling, sanding and painting the sides, I used 18mm electrical tape. It looks good from arms length.
  • The foldout feet are from this link and are scaled up to 2x https://www.thingiverse.com/thing:7015519