Star Adventurer Tripod Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
9" tripod extension provides clearance for meridian flips and/or objects at or near zenith.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 134
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
I needed a tripod extension to provide clearance for meridian flips and/or objects at or near zenith.
9" Tripod extension for Sky-Watcher Star Adventurer Tripod.
The bottom uses a 3/8-16 Brass Heat-set Insert to mount to the base.
The top uses a 3/8-16 2.5" SHCS and standard 3/8 nut.
The center tube is 5.5" and can be shortened to 1.5" to reduce overall extension height to an absolute minimum of 5".
Print Settings:
0.6mm nozzle/0.3mm layer height (0.4mm/0.2mm should be fine)
I used ABS, but PLA, PETG or any -CF blend should work fine.
Update 6/9: Added 100mm and 140mm center Pedestal Risers.