Planetary Gear Motor first draft open SCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have been thinking quite a while now about this and am not sure if this will really ever be a realistically useful…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 88
- Makes
- 0
- Views
- 666
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Have been thinking quite a while now about this and am not sure if this will really ever be a realistically useful motor.
As it is it is completely untested and adjusted for tiny magnets of the following dimensions:
wideM=4.8; // define the Magnet Width
longM=6; // define the Magnet length (this is the hight of the stack too)
deepM=3; // define the Magnet depth (this is the axis of magnetization)
You have the option to sort all the magnets in one direction; or alternate the direction - the winding interval will depend on that, and I admit I haven't figured it out myself!
There is a method cycleVis(); to visualize the spinning of the magnets, there is also a method for animation.
I created a group https://www.thingiverse.com/groups/electromotor-design specifically for people that like the subject and colaboration - come and join!
P.S.: Meanwhile I printed a first test but the print in place gears are totally locked, and I have no idea yet how to configure the gap or achieve a part that can spin!
Category: DIY