Mini ITX PC case - HDD/SSD Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of makerunit's Mini ITX PC case with support for a HDD & space for several SSDs. 2cm thicker.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 273
- Makes
- 3
- Views
- 1,982
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a remix of makerunit's Mini ITX PC case with support for a HDD & space for several SSDs.
(If you make one, please upload a make! it is very much appreciated! Thank You.)
What I changed:
- Made case 2cm thicker.
- Made back panel 2cm taller.
- Added HDD mount to top panel.
- Added no power button version.
- Added vents to back panel.
- Tapered Motherboard supports to allow mounting Motherboard directly to case without standoffs.
- Added Lowered back panel version for use with mounting motherboard directly to case.
I really liked this minimal case, but i wanted to use it as a remote backup server, so i added support for a HDD & due to the case height you can also mount several SSDs on the internal walls (with double sided mounting tape or command adhesive strips). I lowered the Mobo to give a little more breathing room for the cpu cooler. my board & cooler are rather low profile, so please check your measurements before printing.
There is roughly 46mm between the top of the HDD & the motherboard supports if mounting directly to the case & using the Rear_Vented_Lowered back panel.
There is Roughly 40mm if using the 6mm standoffs that makerunit's design uses.
Make sure you use the Rear_Vented_Lowered back panel if you are mounting directly to the case & want the 46mm spacing.
Thank you makerunit for your fantastic design!