1 / 3
Raspberry Pi Osoyoo 7" DSI Touch Screen Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I replaced my Raspberry Pi Touch Screen stand with one from Osoyoo and found that it didn't fit around the DSI cable.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I decided to replace my Raspberry Pi Touchscreen with one from Osoyoo as it only required the ribbon cable between display and Pi for use with my Lyrion Player.
You need to print both legs one left and one right. It needs four M3x12 screws to attach them.
These were printed with 20% infill.
Update 25/06/22: I've now added a pair that can be screwed to the https://www.printables.com/model/1076678-ifi-audio-zen-dac-shelf. All you require are 4 M3 screws.