1 / 1
Prusa Nozzle Brush Holder for HSW
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa Nozzle Brush Holder for HSW - Honeycomb Storage Wall System.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 2
- Views
- 171
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Remixed the Skadis Holder for Prusa Nozzle Brush to work with the HSW system.
Versions:
- V2-0: Has the HSW part against the bed, no support needed for this part.
- V2-1: Only difference is the HSW part is centered and will need supports.
Print Settings:
- Print model(s) as they're orientated in the STL files
- Material: PLA+, PETG
- Nozzle: 0.4mm
- Layer: 0.20mm Structural
- Infill: 15% Gyroid
- Walls: 3 or 4
- Supports: Support enforcers only for the V2-1.stl part. I painted the bottom of the insert part (see photo below) and set ‘Top contact Z distance’ to 0.25 for easier support removal with PETG.
Install:
- You'll need to print one of the HSW Blank Inserts to mount the brush holder to your Honeycomb Wall. I've included one in the model files in the Original HSW Parts folder to make it easier.