1 / 2
Scoring Goal Post (WIP)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
50mm counter numbered from 0 to 14 Made for Guild Ball, maybe useful for other games. Still a WIP.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
Uses with two 5x2 magnets.
Magnet socket might require some tolerance adjustment (Still a WIP)
These models are prepared for easy two-color printing with only one extruder, no MMU or multi-nozzle setup required.
Printer setup
- In Printer Settings → General, enable Single Extruder Multi Material.
- In Printer Settings → Custom G-code, make sure you have the following line under Tool change G-code:
M600 ; pause for manual filament change- The Wipe Tower can be enabled or disabled depending on your preference:
- Enabled: helps purge leftover filament automatically, but uses more material.
- Disabled: lets you purge manually and save filament, ideal for small color changes or flat inlays.
Print procedure
- Slice both color parts as separate objects assigned to different “tools” (for example, Tool 0 = color 1, Tool 1 = color 2).
- When the printer reaches the color change, it will pause automatically and let you swap filament manually.
- Purge the old color and load the new one. You can extrude a little by hand to clean the nozzle.
- Resume the print to continue with the next color.
- Check for any stringing or brim before starting the next stage.