Drybox parts using Rubbermaid 21 cup dry food container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drop-in insert which houses a hygrometer. Optional ball-bearing spindle.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 27
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Drybox insert to fit Rubbermaid 21 cup dry food container. Includes mount for rectangular hygrometer. https://www.amazon.com/dp/B0CJM5R5N6 Optional ball-bearing spindle.
Spindle can be 97mm long section of 1" PVC pipe.
Ball-bearing spindle uses 8x22x7 Miniature Ball Bearings, 608. https://www.amazon.com/dp/B07S1B3MS6
Also required 97mm long 3/16" steel rod. Drill hubs through with #13 drill for press fit to steel rod. Press bearings fully into sleeve. Press fit should be light or bearings might bind up. Press steel rod through one hub. Insert hub and rod through sleeve with bearings. Press second hub onto rod/into bearing.
Fit a 4mm push-to-connect fitting in the snap-cover of the container. Details of that will depend on the type of fitting you select - but basically drill a hole in the cover and secure the fitting.