Ω-series Trapezoidal Drawer Pulls & Knobs (Threaded Insert version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
No supports needed. I have opted to use a Diamond-style 3D effect plate with a Hilbert-curve for first layer for extra fanciness.
There are 4 “styles” to choose in 3 “sizes”
Styles
Knobs (one insert, relatively narrow)
Pull (two inserts, solid)
Blind (two inserts, finger space on the underside)
Handle (two inserts, handle with an open space behind it)
Sizes
Small (16mm-based)
Medium (24mm-based)
Large (32mm-based)
The “Extended” sizes are the same width and length (and thus also hole spacing), but have an additional ½ Basis in Height.
All models take M4 heat-set threaded inserts. For styles that take two threaded inserts, to find the on-center distance between the holes take the nominal width of the model and subtract the Base size. For example, a Medium handle of 96mm nominal width, the inserts will be spaced 72mm apart (96mm - 24mm). Note that the actual sizes of all the handles are smaller than their listed nominal size.